Tiếng Việt- 1 Decree no. 178-CP of October 28, 1994 on the tasks, powers and organization of the ministry of finance promulgated by the government
- 2 Ordinance No. 38/2001/PL-UBTVQH10 of August 28, 2001 , on charges and fees.
- 3 Decree No. 57/2002/ND-CP of June 3, 2002, of detailing the implementation of the ordinance on charges and fees
- 4 Decree of Government No.86/2002/ND-CP of prescribing the functions, tasks, powers and organizational structures of the ministries and ministerial-level agencies
| THE MINISTRY OF FINANCE | SOCIALIST REPUBLIC OF VIET NAM |
| No: 10/2003/QD-BTC | Hanoi , January 24, 2003 |
THE MINISTER OF FINANCE
Pursuant to the Government’s Decree No. 86/2002/ND-CP of November 5, 2002 defining the functions, tasks, powers and organizational structure of the ministries and ministerial-level agencies;
Pursuant to the Government’s Decree No. 178/CP of October 28, 1994 on the tasks, powers and organizational structure of the Ministry of Finance;
Pursuant to August 28, 2001 Ordinance No. 38/2001/PL-UBTVQH on Charges and Fees; pursuant to the Government’s Decree No. 57/2002/ND-CP of June 3, 2002 detailing the implementation of the Ordinance on Charges and Fees;
At the proposals of the Ministry of Communications and Transport in Official Dispatch No. 4365/BGTVT-TCKT of November 19, 2002 and of the director of the Enterprise Finance Department,
DECIDES:
1. Charges for inspection of the technical safety of motorized vehicles currently in circulation.
2. Charges for inspection of the technical safety of special-use vehicular equipment and machinery currently in circulation.
...
...
...
4. Charges for inspection of the quality of components and motorized vehicles in being tested for manufacture and assembly.
5. Charge for inspection of the technical safety and quality of motorized vehicles, special-use vehicular equipment and machinery in manufacture and assembly in Vietnam.
6. Charges for inspection of the technical safety and quality of imported motorized vehicles, special-use vehicular equipment and machinery.
7. Charges for inspection of the quality of devices for checking motorized vehicles.
Article 5.- Several terms used in this Table of Charges are construed as follows:
1. Motorized vehicles include automobiles, tractors, motorized two-wheelers, motorized three-wheelers, mopeds and vehicles of similar kinds, including motorized vehicles used for the disabled.
...
...
...
FOR THE MINISTER OF FINANCE
VICE MINISTER
Tran Van Ta
THE TABLE OF THE RATES OF CHARGES FOR INSPECTION OF THE TECHNICAL SAFETY AND QUALITY OF MOTORIZED VEHICLES AND ASSORTED SPECIAL-USE VEHICULAR EQUIPMENT AND MACHINERY
(Promulgated together with Decision No. 10/2003/QD-BTC of January 24, 2003 of the Minister of Finance)
I. CHARGES FOR INSPECTION OF THE TECHNICAL SAFETY OF MOTORIZED VEHICLES CURRENTLY IN CIRCULATION
1. Basic charge rates:
...
...
...
Calculation unit: VND 1,000/vehicle
Ordinal number
Types of motorized vehicles
Charge rates
1
Trucks, trailer trucks (trucks + semi-trailers), of a tonnage of over 20 tons, and assorted special-use automobiles, tractors
300
2
Trucks, trailer trucks (trucks + semi-trailers), of a tonnage of between over 7 and 20 tons, and assorted special-use automobiles, tractors
...
...
...
3
Trucks of a tonnage of between over 2 and 7 tons
180
4
Trucks of a tonnage of up to 2 tons
150
5
Bong sen and cong nong tractors and transport means of similar kinds
100
...
...
...
Trailers, semi-trailers
100
7
Passenger cars with over 40 seats (including driver), buses
200
8
Passenger cars with between 25 and 40 seats (including driver)
180
9
...
...
...
150
10
Cars with 9 seats or under (including driver), ambulances
120
11
Lambretta, motorized cyclos, three-wheeled
50
2. For motorized vehicles which, through inspection, fail to satisfy the technical safety and environmental protection standards, and must be maintained and/or repaired before having their sub-standard components re-inspected, the charges for subsequent inspections shall be collected as follows:
...
...
...
2.2. If the re-inspection is conducted with seven days (excluding holidays as according to the prescribed regime), counting from the date of the first inspection, the charge for each re-inspection shall be equal to 50% of the rate prescribed in Table 1.
3. The charge for inspection of motorized vehicles for granting the provisional technical safety and environmental protection certificates (valid for no more than 15 days) shall be equal to 50% of the rate specified in Table 1.
4. The charge for inspection of the nature of technical expertise or quality evaluation at the requests of organizations and individuals can be negotiated but shall not exceed three times the rates specified in Table 1.
1. Basic charge rates:
Table 2
Calculation unit: VND 1,000/vehicle
Ordinal number
Types of inspected equipment
...
...
...
First-time inspection
Periodical inspection
I
Assorted special-use vehicular equipment and machinery
1
Bulldozers, with a capacity of between 54 and 100 horse power
240
...
...
...
2
Bulldozers, with a capacity of between 101 and 200 horse power
300
240
3
Bulldozers, with a capacity of over 200 horse power
360
290
4
...
...
...
320
260
5
Ground levelers, with a capacity of over 130 horse power
380
300
6
Scraper machines, with a capacity of up to 24 m3
360
...
...
...
7
Scraper machines, with a capacity of over 24 m3
430
340
8
Steel-wheeled rollers, up to 5 tons
240
190
9
...
...
...
280
220
10
Pneumatic-tired rollers
280
220
11
Sheep-foot rollers
240
...
...
...
12
Asphalt pavers, with a capacity of up to 90 horse power
320
260
13
Asphalt pavers, with a capacity of over 90 horse power
380
300
14
...
...
...
280
220
15
Drilling machines
360
290
16
Packing drilling machines
400
...
...
...
17
Gravel stone distributors
280
220
18
Diesel-fueled pile drivers
400
320
19
...
...
...
400
320
20
Excavators, with a shovel capacity of over 1 m3
480
380
21
Hydraulic pile pressing system
200
...
...
...
22
Combined milling and screening machines up to 25 m3 /hour
300
240
23
Combined milling and screening machines over 25 m3 /hour
400
320
24
...
...
...
380
300
25
Concrete-pumping equipment
240
190
26
Agricultural and forestry tractors joining traffic
280
...
...
...
27
Asphalt-mixing stations, under 40 tons/hour
750
750
28
Asphalt-mixing stations, between 40 tons/hour and 80 tons/hour
1,000
1,000
29
...
...
...
1,500
1,500
30
Asphalt-mixing stations, over 104 tons/hour
2,000
2,000
31
Cement concrete-mixing stations, gradation of up to 40 m3/hour
500
...
...
...
32
Cement concrete-mixing stations, gradation of over 40 m3/hour
750
750
II
Assorted lifting equipment: Lifting machines and cranes with lifting capacity
1
...
...
...
500
500
2
Between 1 ton and 3 tons
600
600
3
Between over 3 tons and 5 tons
800
...
...
...
4
Between over 5 tons and 7.5 tons
1,000
1,000
5
Between over 7.5 tons and 10 tons
1,500
1,500
6
...
...
...
1,700
1,700
7
Between over 15 tons and 20 tons
2,000
2,000
8
Between over 20 tons and 30 tons
2,500
...
...
...
9
Between over 30 tons and 50 tons
2,700
2,700
10
Between over 50 tons and 75 tons
3,000
3,000
11
...
...
...
3,500
3,500
12
Over 100 tons
4,000
4,000
2. When inspections show that special-use vehicular equipment or machinery fail to satisfy technical safety and environmental protection standards, and must be repaired before having their sub-standard components, the charges for subsequent inspections shall be collected as follows:
2.1. If the re-inspection is conducted no more than twice in one day (within working hours), no charge shall be collected. For special-use equipment or machinery which fail to satisfy technical safety standards through an inspection conducted in the afternoon and are re-inspected before the end of the working hours in the following morning, their re-inspection shall be regarded as being conducted within one day. For special-use equipment or machinery which are re-inspected from the third time on, the charge for each re-inspection shall be equal to 50% of the rate prescribed in Table 2.
...
...
...
3. For other special-use vehicular equipment or machinery not yet prescribed in this Table of Charges, their owners and the inspecting agencies shall base themselves on the State’s regulations to reach agreement on specific inspection charges on the principle of harmonization of the two parties’ interests.
4. The charge for inspection of the nature of technical expertise or quality evaluation at the requests of organizations and individuals shall be agreed upon at a level not exceeding three times of the rate prescribed in Table 2.
1. Basic charge rates:
Table 3
Calculation unit: VND 1,000/vehicle
Ordinal number
Contents of transformation
...
...
...
First unit delivered from workshop
The second unit on
1
Change of the use nature of motorized vehicles, special-use machinery (change of original properties thereof)
500
150
2
Change of systems and components of motorized vehicles, special-use vehicular machinery
300
...
...
...
1. Basic charge rates:
Table 4
Calculation unit: VND 1,000/model
Ordinal number
Description of work
Charge rates
1
...
...
...
3,500
2
Testing of general safety requirements for assorted automobiles and trailer trucks (trucks and trailers, semi-trailers) manufactured or assembled from loose components and details
7,000
3
Testing of general safety requirements for assorted automobiles and trailer trucks (trucks and trailers, semi-trailers) newly built on the basis of automobile chassis or other kinds of automobiles
5,000
4
Testing of frames or engines used for automobiles, semi-trailers and trailers
...
...
...
5
Testing of frames or engines used for motorcycles and mopeds
500
6
Testing of other components
300
2. The charge rate prescribed at Point 6 of Table 4 for testing many models of the same kind must not exceed VND 1,000,000/kind.
...
...
...
Table 5
Calculation unit: % of product sale price
Ordinal number
Inspected products
Charge rates
First unit of a kind
Second unit on of the same kind
I
Motorized vehicles
...
...
...
1
Automobiles, semi-trailers and trailers
2.00
0.04
2
Motorcycles, mopeds
3.00
0.07
...
...
...
Special-use equipment and machinery
1
Hot asphalt-mixing stations, Stations for mixing graded concrete, cement concrete
0.50
The minimum charge is VND 3,000,000/ station;
The maximum charge is VND 10,000,000/ station
0.20
...
...
...
The maximum charge is VND 5,000,000/ station
2
Pneumatic-tired rollers, steel-wheeled rollers, vibrating rollers, other special-use machinery joining traffic
2.00
The minimum charge is VND 500,000/unit;
The maximum charge is VND 2,000,000/unit
0.10
The minimum charge is VND 200,000/unit;
The maximum charge is VND 800,000/unit
...
...
...
Construction machinery
1.20
0.50
The minimum charge is VND 500,000/unit;
The maximum charge is VND 3,000,000/unit
The minimum charge is VND 350,000/unit;
The maximum charge is VND 2,500,000/unit
...
...
...
Lifting equipment
1.20
The minimum charge is VND 500,000/unit;
The maximum charge is VND 3,000,000/unit
0.50
The minimum charge is VND 350,000/unit;
The maximum charge is VND 2,500,000/unit
2. The product sale prices for calculation of the charges for inspection of the technical safety and quality prescribed in Table 5 are exclusive of value added tax.
...
...
...
1. Basic charge rates:
Table 6
Calculation unit: % import price
Ordinal number
Description of work
Charge rate (for one unit)
1
Inspecting for certification of the quality of imported motorized vehicles, special-use equipment and machinery
...
...
...
The minimum charge is VND 300,000/unit
2. The import prices are the buying prices of imports or the tax calculation prices promulgated by competent authorities.
3. The charge for inspection and expertise for notification of the quality of special-use motorized vehicles, equipment and machinery shall be equal to 50% of the rate prescribed in Table 6.
VII. CHARGES FOR INSPECTION OF THE QUALITY OF FOR MOTORIZED VEHICLE-CHECKING EQUIPMENT
1. Basic charge rate:
Table 7
Calculation unit: VND 1,000/equipment
Ordinal number
...
...
...
Charge rate
1
Inspecting the quality of motorized vehicle-checking equipment
300
2. Where, through inspection, equipment fail to satisfy the manufacturer’s standards and thus they must be repaired or adjusted and re-inspected, the re-inspection charge shall be equal to 50% of the charge rate prescribed in Table 7.
3. Where the checking equipment suddenly break down and must be repaired and re-inspected ahead of schedule, the inspection charge prescribed in Table 7 shall apply.-
- 1 Decision No. 101/2008/QD-BTC of November 11, 2008, amending and supplementing the Finance Minister’s Decision No. 10/2003/QD-BTC of January 24, 2003, promulgating the tariff of charges for technical safety and quality inspection of motor vehicles and special-use equipment and machinery
- 2 Circular No. 114/2013/TT-BTC dated August 20th, 2013 regulations on schedules of charges for inspection of technical safety and quality of motor vehicles, components, dedicated equipment and heavy-duty vehicles, charge colection, paymen, management and allocation machenism
- 3 Circular No. 114/2013/TT-BTC dated August 20th, 2013 regulations on schedules of charges for inspection of technical safety and quality of motor vehicles, components, dedicated equipment and heavy-duty vehicles, charge colection, paymen, management and allocation machenism
- 1 Decree of Government No.86/2002/ND-CP of prescribing the functions, tasks, powers and organizational structures of the ministries and ministerial-level agencies
- 2 Decree No. 57/2002/ND-CP of June 3, 2002, of detailing the implementation of the ordinance on charges and fees
- 3 Ordinance No. 38/2001/PL-UBTVQH10 of August 28, 2001 , on charges and fees.